LiquiFoil: The Peel-off coating for temporary glass protection

The super easy way to prevent damage during construction.

Simply roll or spray LiquiFoil on to windows or other smooth finished surfaces, like powder-coated aluminium, stainless steel,cladding, etc.
LiquiFoil protects these surfaces from dirt, paint, scratches, weldingflecks, cement and other damage. When you’re done, just peel or jet spray it off. It leaves a clean and shining surface that makes a good impression on your customers and saves
you a lot in repair costs.

Bucket Liquifoil, the peelable coating for surface protection

Delivered in buckets of 20 liter. Average usage: 5-9 m2/L.

order now>>>
_____________________________________________________________________

Safe, easy and durable peel-off coating

Safe peel-off coating
Renovio’s Liquifoil peel-off coating is a water-based product which is non-toxic and non-flammable.

LiquiFoil is easy
Liquifoil can be easily applied with a roller or airless.

Durable peel-off coating
Once Liquifoil is applied, it stays firmly in place for the length of the project. Since you “paint” it on, there is no cutting waste compared to conventional plastic sheets. It peels off cleanly, leaving no remnants that have to be removed. Note: When applying to new surfaces, it is helpful to apply a small test area first. This will help you decide how much coating needs to be applied and how long it takes to dry.

__________________________________________________________________________

Peel-off coating as easy as 1, 2, 3…

1. Roll/spray on
LiquiFoil is a peel-off coating that can be used on glass and other surfaces to provide temporary protection during construction or remodeling.

Apply LiquiFoil using a paint roller, brush or spray gun. Make sure the roller or brush is completely covered with the LiquiFoil. Apply a thick coat of the product. Allow 4 to 6 hours for the product to dry. The drying time may be accelerated by applying heat lampsor blowers to the surface. The coating is semitransparent so that daylight can come in, but people can not see through it.

2. Protect
Once applied, LiquiFoil protects glass and other smooth surfaces against the normal wear and tear incurred during construction or remodeling projects. It protects against dirt, paint, scratches, welding flecks, cement, silicon paste and other damage. LiquiFoil can also be applied to floor sand other high use areas to protect them against scuffs and spatters.

3. Peel off
After the project has been completed, simply peel off LiquiFoil and reveal the clean and shining surface. No further cleaning is required.

_______________________________________________________________________________

Key advantages

• Drastically reduces damage costs during construction

• Reduces labor costs

• Shields buildings from prying eyes

• Tough coating repels water when dry, washable when wet

• Produces much less waste than standard protective films

• Water-based, non-toxic and non-flammable

_________________________________________________________________________________